FAQ

Frequently Asked Questions about our products

Click on the links below to find out more:

 

The Diaper Sprayer Nappy Sprayers

Bear Hug Baby Original Ring Slings & Mama Patch Ring Slings

Rockin Green Detergent

How to use a bitti tutto

(more FAQs coming)

 

__________________________________________________________________________________

 

The Diaper Sprayer Nappy Sprayers

 

What is The Diaper Sprayer Nappy Sprayer?
The Diaper Sprayer is a must have device that cleans cloth nappies with a spray of water into a toilet. The Sprayer attaches to your existing toilets.

 

How long does it take to install?
Included in your order you will find everything you need and a step-by-step picture instructions to install this unit on a typical toilet in about 10 minutes.

 

Do I need to buy any other parts to install The Diaper Sprayer?
The Diaper Sprayer comes with everything you need to install on a typical Australian toilet that has a 1/2" compression fitting outlet.

 

How durable is the The Diaper Sprayer?
These are not the low quality and cheap version sprayers made in China or Taiwan that leak and cause expensive damage. Our line of Bidet Sprays can be found all over the world, from hotels, residential buildings, commercial buildings, etc.. Beware of cheap quality sprayers that could end up leaking or rupturing causing flood damage because of a cheap substitute choice. Why not buy something that is backed by HISTORY, QUALITY, and a NAME!

 

Tools required for installation?
The only tool needed to install The Diaper Sprayer nappy sprayer is an adjustable wrench.

 

How do you control the pressure?
The Diaper Sprayer comes with a "T" style control valve to control the pressure to the sprayer. This way, the tank of the toilet fills quickly and water pressure to the hand spray is reduced to a lower pressure. Then you can use the built in hand trigger on the sprayer to reach the desired spray pressure.

 

Back to FAQ list (top)

 

__________________________________________________________________________________

 

Bear Hug Baby Original Ring Slings

Mama Patch Ring Slings

 

What are ring slings?

Ring slings are single shouldered soft baby carriers made with a length of durable fabric (usually cotton, silk, linen or othe woven material) with two rings sewn in one end. These rings are specially crafted for babywearing purposes. They are designed to be adjustable to your shirt size and your baby, and are easily worn or taken off.

How do I use a ring sling?

The following sequence of pictures will help you learn to use your ring sling. Alternatively, contact Rebecca to give you a live demo and personal guidance in using your ring sling. (Instructions are used with permission by Bear Hug Baby)

Part 1

Part 2

 

__________________________________________________________________________________

 

How to use a bitti tutto

Bitti tutto can be used in four different size settings to suit babies from newborn (approx 3kgs) right through to a small child (20kg plus).

 

NEWBORN/SMALL – SIMILAR FIT TO THE SMALL SIZE BITTI D’LISH

Snap down the front of the nappy as far as it can go. Fasten the front wings around hips to the required setting for your baby.

As most newborns don’t move around a lot, you may not need to use the hip snaps, as the nappy will stay in place without wing droop, you can use them if you wish, just fasten when you fasten each wing.

 

Soaker Pads: You can use either the long soaker snapped on the blue snaps to the shortest setting, or the shorter soaker with the mini soaker attached.

If your baby is a heavy wetter, you may prefer to use the long soaker snapped on the blue snaps to the shortest setting, with the mini soaker attached.

MEDIUM – SIMILAR FIT TO THE MEDIUM SIZE BITTI D’LISH

Snap down the front of the nappy to the second smallest setting, leaving one row of snaps showing. Fasten the front wings to the required setting for your baby.

You may wish to use the hip snaps to help give a fantastic fit, simply fasten the hip snaps at the same time you are fastening the front wings. If using the hip snaps, you can tuck the hip snap cover away in the hidden pocket.

 

Soakers Pads: You can adjust the soaker pads in any combination of ways that you find best suits your baby, but we recommend starting with the following:

For boys use the long soaker pad adjusted to the medium setting, with the mini soaker attached, snapped in at the front (yellow to purple).

For girls use the long soaker pad adjusted to the medium setting, with the mini soaker attached, snapped in at the back (yellow to yellow).

LARGE - SIMILAR FIT TO THE LARGE SIZE BITTI D’LISH

Snap down the front of the nappy to the top row of snaps, leaving two rows of snaps showing. Fasten the front wings to the required setting for your baby.

You may wish to use the hip snaps to help give a fantastic fit, simply fasten the hip snaps at the same time you are fastening the front wings. If using the hip snaps, you can tuck the hip snap cover away in the hidden pocket. (Detachable hip snap covers which are simply removed on some nappies.) If you are using the outer snaps around the waist and don’t need the hip snaps, replace the hip snap covers, so no snaps will touch your baby’s delicate skin.

 

Soakers Pads: You can adjust the soaker pads in any combination of ways that you find best suits your baby, but we recommend starting with the following:

For boys use the long soaker pad adjusted to the large setting, with the mini soaker attached, snapped in at the front (yellow to purple).

For girls use the long soaker pad adjusted to the large setting, with the mini soaker attached, snapped in at the back (yellow to yellow). You can use the shorter soaker pad as well snapped in at the other end if you find you need it.

For night time, you can use all three soaker pads, plus add an extra itti bitti mini booster to the short soaker pad for extra absorbency.

EXTRA LARGE – HIGHER RISE AND LARGER WAIST ADJUSTMENT THAN LARGE SIZE BITTI D’LISH

Leave the front of the nappy unsnapped, so it is at the maximum length. Fasten the front wings to the required setting for your baby.

You may wish to use the hip snaps to help give a fantastic fit, simply fasten the hip snaps at the same time you are fastening the front wings. If using the hip snaps, you can tuck the hip snap cover away in the hidden pocket. (Detachable hip snap covers which are simply removed on some nappies.) If you are using the outer snaps around the waist and don’t need the hip snaps, replace the hip snap covers, so no snaps will touch your baby’s delicate skin.

 

Soakers Pads: You can adjust the soaker pads in any combination of ways that you find best suits your baby, but we recommend starting with the following:

For boys use the long soaker pad adjusted to the largest setting, with the mini soaker attached, snapped in at the front (yellow to purple).

For girls use the long soaker pad adjusted to the largest setting, with the mini soaker attached, snapped in at the back (yellow to yellow). You can use the shorter soaker pad as well snapped in at the other end if you find you need it.

For night time, you can use all three soaker pads, plus add an extra itti bitti mini booster to the short soaker pad for extra absorbency.

Back to FAQ list (top)

Home

© 2009 Bean Sprout Bubba. ABN: 68 220 318 143